Fluke 113 True-RMS 600V Digital Multimeter

The new 113 Utility Multimeter has the features needed to repair most electrical problems. This meter is simple to use and has significant improvements over other utility multimeters. With features such as Fluke’s VCHEK™, added measurement functions, backlight, conformance to the latest safety standards, and a much larger display that’s easier to view, this new meter is a must have for the utility users toolbox.
Features:

VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage and continuity
True-rms for accurate ac measurements on non-linear loads
A large backlit display allows for easy visibility in low-lit areas
Record signal fluctuations using the Min/Max function
Diode test for testing general-purpose germanium, silicon, and power diodes
Integral holster with probe holders for easy storage
Auto and Manual ranging for added user functionality
Meets Measurement Category CAT IV 600 V standards for a higher level of safety
The optional TPAK magnetic hanger(sold separately) allows the user hands-free flexibility

Specifications:

Maximum voltage between any terminal and earth ground: 600 V
Display: 3 3/4-digits, 6000 counts, updates 4/sec
Operating temperature: -10°C to 50°C (14°F to 122°F)
Storage temperature: -40°C to 60°C (-22°F to 140°F)
Temperature coefficient: 0.1 x (specified accuracy) / °C (< 18°C or > 28°C)
Operating altitude: 2,000 m
Storage altitude: 10,000 m
Relative humidity: 95% to 30°C, 75% to 40°C, 45% to 50°C
Battery type: 9 Volt Alkaline, IEC 6F22
Battery life: Alkaline: 300 hours typical, without backlight
Size (H x W x L): 167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in)
Weight: 13.0 oz (404 g)
Safety: IEC 61010-1: Pollution Degree 2, IEC 61010-2-033: CAT IV 600V
EMI regulations: Complies with FCC Part 15, Class B
VCHEK Input impedance (nominal): ~3 kΩ < 300 pF
VCHEK Common mode rejection ratio (1 kΩ unbalanced): > 60 dB at DC, 50 or 60 Hz
Ω Open circuit test voltage: < 2.7 VDC
Full scale voltage: < 0.7 VDC
Diode test open circuit test voltage: 2.7 VDC
Full scale voltage: 2.000 VDC
Ω Short circuit current: < 350 μA
Diode test short circuit current: < 1.0 mA

Includes:

Fluke 113 True RMS Digital Multimeter
Installed 9V battery
Test leads
Users manual"


Duke Energy #50130279
Dominion Energy #42513938