Stanley Hydraulic Crimping Tool With 1-1/2" C-Style Head CT10066AN

Crimping connectors with the Stanley Hydraulic Tools CT Series crimpers is quick and easy. They are 5-10 times faster than hand-pumped tools and more than twice as fast as high pressure double acting crimpers. The CT Crimpers require no booster or intensifier which means they can be operated directly from the hydraulic circuits already installed on line trucks, dedicated power units, or from one of the STANLEY portable Power Units. Swivel Design on all models provides 360° continuous rotation of the die head for easy alignment to give higher quality crimps.
1650 Models allow the use of the CT on almost any hydraulic system of at least 1,650 psi (114 bar). An accurate, built in relief valve ensures that at these system pressures and higher, a full die load is achieved preventing over-crimping.
CT10 STANLEY® with its unique C-type opening of 1-1/2 inches permits the operator to crimp material up to 750 MCM aluminum or copper cable. The larger opening can eliminate the need for larger, more expensive 15 ton tools when crimping large connectors that don’t require 15 tons of die load. The CT10 STANLEY® accepts standard U-type dies.

Capacity: 750 MCM Copper, 750 MCM Aluminum
Weight: 19 lbs
Length: 22 inch
Width: 7 inch
Hydraulic Pressure:1650-2500 PSI
Hydraulic Crimping Force: 12 Tons
Input Flow Range: 3-9 GPM
Optimum Flow: 8 GPM
Porting: -8 SAE
Connect Size & Type: 3/8 inch NPT
Max Pressure: 2000 PSI