Polywater Pulling Lube - 5 Gallon Pail J-640

This item can only ship via ground. Choosing a faster shipping option during checkout, will not affect this item's delivery speed.
The proven, high-performance cable pulling gel for long cable installations. For three decades, millions of feet/meters of underground electrical and communications cable have been pulled using Polywater® J Electrical Lubricant. The high-performing, slow-drying, and clean nature of this water-based gel electrical lubricant provides maximum tension reduction in all types of cable pulling. This cable pulling gel is both a proven and popular choice for long and multiple-bend cable pulls.
Features:

SUPERIOR FRICTION REDUCTION: For low cable pulling tensions
HIGH CLING FACTOR: Remains on cable jacket throughout installation
FIELD-FRIENDLY APPLICATION: Can be pumped with the LP-D5 drill-powered lubricant pump, hand applied, or deployed with Front End Packs™
CLEAN AND NON-STAINING: Minimize clean-up time, especially in finished indoor use
TEMPERATURE STABLE: Unaffected by freeze/thaw cycles and performs well when pulling in hot environments.
UL LISTED: This cable pulling gel is Listed to applicable standards and requirements by UL.

Specifications & Applications:

Cable Compatibility: Passes IEEE 1210 physical and electrical testing; Generic Requirements for Optical Cable Innerduct, Associated Conduit, and Accessories.
Friction Testing: Polywater J shows superior friction reduction on a variety of jacket types.
Physical Properties: Contains no wax, grease, or silicone. Has no flash point and dried residue will not support combustion. Will not cement cable into conduits.
Applications: Long installations with multiple bends where superior friction reduction is critical; underground utilities, data centers, wastewater treatment plants and mass transit systems. Polywater® J is not recommended for LSZH/LSHF and certain CSPE and CPE cable jackets.
For these jacket types, Polywater LZ is the recommended/approved product.
Temperature Use Range: Regular Polywater J: 20°F to 120°F (-5°C to 50°C).

Product Notes:

Passes IEEE 1210 physical and electrical testing
Dried residue will not support combustion and spread flame
Slow-drying
Available in Front End Pack System
Can be pumped or hand applied

Size & Weight:

Size: One 5 Gallon Bucket
Weight: 44 Pounds