Condux 819 D.Drill® Directional Drilling Swivel - 3,300 Compression/10,000 Tensile 08190020

Designed specifically for directional drilling, the Condux 819 D.Drill Swivels prevent boring equipments’ rotational torque from interfering with the product (cable or conduit) being pulled. The D.Drill Swivels are greasable and double sealed to keep contaminants out. Clevis pins with hex nuts allow for installation and removal from either side of the swivel. There is a 90 day warranty on the directional drill swivels.
CAUTION: To be used for directional drilling only.
CAUTION: Condux requires the use of a calcium based lubricant only. Other lubricants may have adverse reactions when exposed to bentonite products. Condux requires that the swivels be flushed with grease after each use to purge any contaminants that may have penetrated past the seals into the swivel while boring.
Specifications:

Part Number: 08190020
Tension: 10,000 (lbs), 44,480 (N)
Compression: 3,300 (lbs), 14,678 (N)
Dimension A: 2 (in), 51 (mm)
Dimension B: 0.75 (in), 19 (mm)
Dimension C: 7.83 (in), 199 (mm)
Dimension D: 1.81 (in), 46 (mm)
Dimension E: 0.63 (in), 16 (mm)
Dimension F: 0.75 (in), 19 (mm)
Dimension G: 2.89 (in), 73 (mm)
U.S. Patent No. 5,607,248