SensorLink AMPSTIK®+ 5000A 500kV True RMS Ammeter With 2.5" Standard Jaw 8-020 XT Plus

The Ampstik+ measures in every electric utility setting with a linear current sensor to accurately measure .5A to 5000A, while in voltage environments up to 500kV. The opening of the amp sensor is electronically closed, while external currents are electronically rejected. This design enables the user to measure an individual conductor within close proximity to adjacent conductors without interference errors. The Ampstik+ holds up to four readings, ending the need to raise and lower the hot stick for each reading. Position the unit over the conductor and the meter will store the current measurement within 2 - 4 seconds. Move to the next conductor and repeat the process. Return the unit to eye level once all the measurements have been taken. This simple process makes the Ampstik+ a practical, labor saving instrument. The backlight will automatically power on when the ambient light is low. This feature enables users to better view readings on the display in low-light situations.
Features:

Sample and hold four amp readings
Open CT rejects stray magnetic fields
Easily slip on and off the conductor
No position sensitivity
Backlit LCD for low-light environments
Overhead and underground use

Range of Operation:

Voltage: 0 - 500 kV
Current: .5 - 5000 A

Sensor Opening:

Standard Opening Width: 2.5 in, 6.35 cm

Resolution:

Amps 1 - 99.9 A: 0.1 A
Amps 200 - 1999 A: 1 A
Amps 2000 - 5000 A: 0.01 kA

Accuracy:

± 1% ± 2 counts

Operation:

Frequency: 60 Hz (57 to 63 Hz) or 50 Hz (47 to 53 Hz) Models Available
Controls: One button operation
Readings: Four reads

Mechanical:

Weight Standard Sensor: 1.75 lbs, 0.79 kg
Operating Temperature: -22 to 140 degrees F (-30 to + 60 degrees C)
Display: 3.5 Digit Display
Housing: Fire resistant and waterproof polycarbonate & silicone
Hot stick mounting: Universal chuck adapter (Hot stick not included)
Battery: 9V Alkaline or Lithium