Chance Single-Type Lever Lift Wire Tong Support M4760W

Lever Lift Wire Tong Supports are employed where working space on the pole is limited, or on H-frame or heavy suspension insulator construction for raising or lowering conductors with wire tongs. As a general practice, the Lever Lift should be used in place of Wire Tong Saddles where loads exceed 500 pounds. A wire tong is attached to the Single Type by simply removing the cotter key, sliding the shaft to the side, placing the butt ring of the tong into the fork, shooting the shaft through, and replacing the cotter key. Made of a high strength aluminum alloy, these lever Lifts are light in weight . . . and easy to handle. They provide a total conductor lift of 203/4 inches, and will support any size of wire tong. When two Lever Lifts are required, one at each side of the pole, they can be attached at virtually the same height.An arbor adapter is available to convert the Single Type Lever Lift to a Double Type when desired. Each Lever Lift is equipped with a clevis for attaching rope blocks. The clevis, used at the end of the Lever Lift for attaching the lower rope blocks, will rotate on the same pin that holds the wire tong(s), permitting freedom of movement.
Features:

For use where working space on pole is limited
Also used on H-frame or heavy suspension insulator construction for raising or lowering conductors with wire tongs
Lever Lift should be used in place of Wire Tong Saddles when loads exceed 500 lbs.
Wire tong is attached to the Single Type by simply removing the cotter key
Next, slide the shaft to the side, placing the butt ring of the tong into the fork
Next, shoot the shaft through, and replace the cotter key
For the Double Type, remove the wing nuts, slip butt rings of the two wire tongs on the shaft extensions and replace wing nuts
High-strength aluminum alloy Lever Lifts are lightweight and easy to handle
Provide a total conductor lift of 203⁄4 inches, and will support any size of wire tong
When two Lever Lifts are required, one at each side of the pole, they can be attached at virtually the same height
An arbor adapter is available to convert the Single Type Lever Lift to a Double Type
Each Lever Lift is equipped with a clevis for attaching rope blocks
The clevis, used at the end of the Lever Lift for attaching the lower rope blocks, will rotate on the same pin that holds the wire tong(s), permitting freedom of movement

Specifications:

Strength Rating - Ultimate: 1000 lb (453 kg)
Style: Single Type Lever Lift
Type: Wire Tong
UPC: 096359048312
Weight: 15.33 lb (7 kg)
Made in the USA

Click HERE for all Chance wire tong related items.