Milwaukee M18 FUEL™ 1/2" Mid-Torque Impact Wrench Kit (resistant batteries) 2962P-22R

Our M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Pin Detent Kit delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. Our 1/2" Impact Wrench is the most compact in its class, giving our users access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Our REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. Our M18 REDLITHIUM™ XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
Features:

Pin detent locks sockets in place securely, especially while working overhead
The POWERSTATE™ brushless motor delivers up to 550 ft-lbs. of max fastening torque
4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal control
Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
Mode 1 IPMs: 0-900; Mode 2 IPMs: 0-2,100; Mode 3 IPMs: 0-3,100; Mode 4 IPMs: 0-3,100
Works in up to to 69kV environments
6.0" in length provides most access in tight spaces
Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening
Mode 1 RPMs: 0-1,250; Mode 2 RPMs: 0-1,950; Mode 3 RPMs: 0-2,575; Mode 4 RPMs: 0-2,575
REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
Compatible with all M18™ batteries & Chargers

Specifications:

Wrench Type: Mid-Torque
Anvil Type: Detent Pin
IPM: 3500 ipm
Maximum Torque: 650 ft/lbs
Fastening Torque: 650.0 ft/lbs
Nut-Busting Torque: 550 ft/lbs
Tool Warranty: 5 Year (Tool), 3 Years (Battery)
Power Source: Cordless
Motor Type: Brushless
Weight: 5.1 lb
Length: 6.0 in
Height: 10.12 in
Width: 2.74 in
Nut Busting Torque: 650 (ft-lbs)
Brushless: Yes
Battery System: M18
Battery Type: 18 Volt Lithium Ion
Chuck Type: Not Applicable
Drive Control: 4-Mode w/ Bolt Removal Mode
Maximum RPM: 2575 rpm
Peak Torque: 650 ft/lbs
RPM Range: 0 - 2,400

Includes:

(1) M18 FUEL™ 1/2 " Mid-Torque Impact Wrench w/ Pin Detent(2962P-20)
(2) M18™ REDLITHIUM™ XC5.0 Resistant Battery(48-11-1850R)
(1) M18™ & M12™ Multi-Voltage Charger(48-59-1812)
(1) Blow Molded Case


Replacement for Milwaukee item 2962P-22.