888-878-5480

Huskie 18V(Makita) 6.6-Ton AL/CU Cutting Tool Kit With 120VAC Charger REC-MK734YC

swipe to see more images.

Large copper cable cutting is finally made easy with the REC-MK734YC – just pull the trigger and 6.6 tons immediately goes to work for you. The hydraulic system now features a rapid advance for reduced cycle times. This tool is similar to the REC-MK730Y, but has a slightly larger jaw opening without a “keeper” guard. Its sharp blades are rated for copper and aluminum cables only, up to 800 MCM or 1.4″ Al outside diameter.; The open “C” type jaw is very convenient for the operator when reaching out to cut cable, as opposed to latching a cutting jaw around the cable. The jaws will accept a maximum of 800 MCM copper or aluminum cables up to 1.4.” Distortion of the cable is minimal and cables can still be sleeved easily. Once the cable is severed, the cutter blades can be opened by the push of the release trigger located below the activation trigger – one finger is all that is needed to cut and release the tool. NOTE: DO NOT CUT STEEL.
Kit Contains: 6.6 Ton Cutting Tool, (2) 18V/5.0Ah Makita LXT® Li-Ion Batteries, 120VAC Charger, Tool Bag


Optimized hydraulics offer 20% faster advance and 30% faster retraction speeds than previous generation tools.
Patent pending Auto-Retract feature provides a user-selectable ON/OFF switch to enable or disable automatic cycle retraction. Auto-Retract can also be stopped mid-cycle to speed repeat operation.
Lightweight ergonomic design for one-handed operation
180˚ rotating head
Protective brush guards
Tested up to 75kV – For use in live line applications without damage to internal circuitry
Works with Genuine Makita LXT® 18V Lithium-Ion Batteries
Integrated LED light for working in low light conditions
5Yr. Tool / 3Yr. Battery & Charger – Huskie Tools Limited Warranty
Cutting Capacity: Aluminum 1.4″ OD, Copper 800 MCM, ACSR – Do Not Cut
Weight: 8.8 lbs (4.0 kg)
Dimensions: 15.6" x 10.6" x 3.3" (396 mm x 269 mm x 85 mm)